430 Stainless Steel Coil Sheet Strips UNS S43000 Astm A240 overview
Stainless steel type 1.4016 is also commonly known as grade 430. Stainless steel 430 combines good corrosion resistance with good formability and ductility.
Type 430 is a chromium ferrite stainless steel with moderate corrosion and heat resistance. It is nonhardenable by heat treatment. Type 430 is magnetic and exhibits good ductility. It can be readily formed into many desired shapes.
Type 430Li is a chromium ferritic stainless steel similar to 430, with moderate corrosion and heat resistance. It is non-hardenable by heat treatment, magnetic and can be readily formed into most desired shapes. Type 430Li has low interstitials providing better ductility over regular 430.
| Grade | UNS No | Old British | Euronorm | Swedish SS | Japanese JIS |
| BS | En | No | Name |
| 430 | S43000 | 430S17 | 60 | 1.4016 | X8Cr17 | 2320 | SUS 430 |
| 430F | S43020 | - | - | 1.4104 | X12CrMoS17 | 2383 | SUS 430F |
| Grade | Reasons for choosing 430 And other alternative grades |
| 430F | Higher machinability than 430 is needed in bar product, and reduced corrosion resistance is acceptable |
| 434 | Better pitting resistance is required |
| 304 | Slightly higher corrosion resistance is needed, together with greatly improved ability to be welded and cold formed |
| 316 | Much better corrosion resistance is needed, coupled with greatly improved ability to be welded and cold formed |
PRODUCT FORMS:
Coil , Sheet, plate , Strip .wire ,- Profile, Round, Flat, Square
430 Stainless Steel Coil Sheet Strips UNS S43000 Astm A240 Specification and Dimension Ranges
Specififcation:
Strip, Coil, Foil Wire, AMS 5503, ASTM A240
Dimension Ranges:
| Width | Thickness | Inner Diameter | Steel Grade | Surface Finish |
| 610~2030 mm | 0.15~3.0 mm | 610 or 508 +0/-5 mm | 201; 254 SMO; 301; 301 AL; 301Si; 302; 303; 303 SE; 304; 304 L; 304 LV; 304 V; 3049; 305;30512; 308; 309; 309 S; 309 SCB; 310; 310 S; 316; 316 L; 316 LN; 316 Ti; 317; 317 L; 321; 330; 347; 384; 405; 409; 410; 410 S; 414;416; 416 SE; 420; 420 A; 420 HC; 420 LC; 420 MO; 430; 430Li; 434; 436; 439; 440 A; 440 C; 441; 442; 444; 446; 18 SR1;Carpenter 20,CB32; Carpenter 4552; Custom 450; 18-9LW1; 19-90L4; Greek Ascology;; AL-6XN4; 904L; Duplex 2205; Duplex 2304; Duplex 2507,Nickel alloys , Titanium and Ti alloys | 2B, 2D, BA, No.3, No.4, No.5, SB, HL |
| 610~2030 mm | 2.5mm~10 mm | 610 or 508 +0/-5 mm | | No.1 or As requied |
Coil Slitting Mill Capability :
Striping processing, commonly known as “slitting “, refers to the winding of a metal coil by unwinding, slitting, leveling, winding, and processing into a desired width. Slitting processing is a basic metal processing technology that combines high-quality equipment with skilled craftsmanship. it can be obtained with strict tolerance, perfect surface control , safe packaging as well as fine transportation.
- Max thickness: 18 mm
- Min thickness: 0.1 mm
- Max width: 2150 mm
- Min width: 8 mm
- Width tolerance: 0 – 0.1 mm
- Burr: T<1mm: ≤0.05mm; T≥1mm: ≤5%T
430 Stainless Steel Coil Sheet Strips UNS S43000 Astm A240 Application
Architectural, automotive parts, cooking utensils, fasteners, food processing, oil burners parts, television cones, tobacco machinery parts
430 Stainless Steel Coil Sheet Strips UNS S43000 Astm A240 Technical datasheet
CHEMISTRY TYPICAL
Carbon: 0.022 max
Manganese: 1.00 max
Silicon: 1.00 max
Chromium: 16.00 - 18.00
Nickel: 0.50 max
Molybdenum: 0.50 max
Phosphorus: 0.040 max
Sulfur: 0.030 max
Copper: 0.50 max
Iron: Balance
PHYSICAL PROPERTIES
Density: 0.28 lbs/in3 7.74 g/cm3
Electrical Resistivity: microhm-in (microhm-cm):
68 ° F (20 ° C): 23.68 (60)
Specific Heat: BTU/lbl° F (kJ/kg•K):
32 - 212 ° F (0 - 100 °C): 0.11 (0.46)
Thermal Conductivity: BTU/hr/ft2/ft/° F (W/m•K)
At 212 °F (100 °C): 15.1 (26.1)
At 932 °F (500 °C): 15.2 (26.3)
Mean Coefficient of Thermal Expansion: in/inl° F (µm/m•K):
32 -212 ° F (0 - 100 °C): 5.8 x 10-5 (10.4)
32-1000 ° F (0- 538 °C): 6.3 x 10-5 (11.4)
Modulus of Elasticity: ksi (MPa)
29 x 103 (200 x 103) in tension
Magnetic Permeability: Magnetic
Melting Range: 2600 - 2750 ° F (1427 - 1510 °C)
FORMS
Coil -Strip, Foil, Ribbon Wire -Profile, Round, Flat, Square
MECHANICAL PROPERTIES AT ROOM TEMPERATURE
PROPERTIES: ANNEALED
Ultimate Tensile Strength: 65 KSI min (450 MPa min)
Yield Strength (0.2% offset): 30 KSI min (205 MPa min)
Elongation: 22% min
Hardness: Rb 89 max
430 Stainless Steel Coil Sheet Strips UNS S43000 Astm A240 Products display and Package Details
Packaging (details)
1. Pallets with several coils
1.1 Coils packed eye to sky on one-way pallet with spacers without pallet cover.
1.2 Coils packed eye to sky on one-way pallet with spacers and covered with shrink-wrap.
1.3 Coils packed eye to sky on one-way pallet with spacers and covered with paper hood.
1.4 Coils packed eye to sky on one-way pallet with spacers and covered with wooden box.
1.5 Coils packed eye to sky on pallet with spacers without cover.
1.6 Coils packed eye to sky on pallet with spacers and shrink wrap.
1.7 Coils packed eye to sky on pallet with spacers and paper hood.
2. Pallet with single coil
2.1 Coil packed eye to sky on one-way-pallet without cover.
2.2 Coil packed eye to sky on one-way-pallet with shrink wrap.
2.3 Coil packed eye to sky on one-way-pallet with paper hood.
2.4 Coil packed eye to sky on one-way-pallet with wooden box.
2.5 Coil packed eye to sky on pallet without cover.
2.6 Coil packed eye to sky on pallet with shrink wrap.
2.7 Coil packed eye to sky on pallet with paper hood.
3. Pallets with multistrip
3.1 Multistrip on one-way pallet.
4. Coils standing, unpacked
5. Pallets with spools, standing with horizontal axe
5.1 Wooden spool on one-way pallet standing with horizontal (eye to the wall) axe.
5.2 Cardboard spool (cardboard core and cardboard sheet) on one-way pallet standing (eye to the wall).
6. Cut lengths
6.1 Bundled.
6.2 On wooden boards.
6.3 In wooden boxes.
7. Special customer requests for packaging
7.1 Weight per packing unit.
7.2 Design and size of pallet.
7.3 Number and kind of coil tying.
7.4 Number and kind of interleaving spacer strips.
7.5 Corrosion protection.
7.6 Kind of wood and wood protection used.
7.7 Marking of material and packing.
General Q and A Questions
Q: Would you provide samples For free?
A: Yes. with on stock specification We provide samples For Free. Freight charge collect
Q: What information should i provide to source for the right products?
A: Material grade, width, thickness, coating and Purchase quantity, Expected lead time, etc
Q: What are the shipping ports?
A: Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you
can choose other ports according to your needs.
Q: About product prices?
A: Prices vary from period to period due to cyclical changes in the price of raw materials.
Q: How long does your delivery time take?
A: In general, our delivery time is within 5-45 days, and may be delayed if the demand is extremely
large or special circumstances occur.
Q: Can I visit your location?
A: Of course, we welcome customers from all over the world to visit our factory. However, some
of the plants are not open to the public.
Q: Does the product have quality inspection before loading?
A: Of course, all our products are strictly tested for quality before packaging, and unqualified products will be destroyed. We provide All Original Mill test certificate and support third party inspection.
Q: How to pack the products?
A: The inner layer has a waterproof paper outer layer with iron packaging and is fixed with a fumigation
wooden pallet. It can effectively protect products from corrosion during ocean transportation.
Q: What is your working time?
A: In general, our online service time is Beijing time: 8:00-22:00, after 22:00,
we will reply to your inquiry during the next working day.
Product Tags:
|
|
Architectural AMS 5503 430l Stainless Steel Cold Rolled Coil Images
|
